The 5.3kW Solaranda™ Grid-tied Kit

This 5.28kW system will produce ~ 8,448 kWhr/yr!
* Assumes Phoenix with ave 6.2 sun hrs/day, and ~ 10 degrees tilt for the system roof. Output calculated with PVWatts.org calculator based on NREL data and a conservative derating factor.


This system will need ~ 510 sq feet of room.
The dimensions are ~17' x 30'.
Has 6 posts.
The flat configuration is at a height of 8'.
The option for a 10 degree pitch will put the back side up at ~10'

This kit will include:

• 24 x 220 watt monosilicon solar panels
• SMA SB5000US Grid tied inverter
• Mounting brackets for panels to the structure
• Steel beams and posts for internal strength
• Decorative Aluminum posts, rafters and lattice for a maintenance-free structure with a lifetime warranty
• Aluminum has a wood engraved faux finish and is available in several colors
• Lattice ends are pre-assembled
• All Assembly Instructions

Your site will have to be prepared with necessary foundation/footers for the structure per your local code requirements. Your installer will also have to provide the appropriate AC and DC disconnects and grounding per local code requirements when it is installed.


(An off-grid system is also available by SPECIAL ORDER. Please contact us, if you would like to consider this option, and we can work with you on sizing the battery bank appropriately.)


* Costs will include Steel beams and posts with decorative Aluminum structure for rafters and lattice, all brackets, and the PV system

* Engineered to handle Live-Loads in various areas throughout the country.

* Each design has a PE (Professional Engineer) stamp on the structural engineering of the system.

* CAD drawings and full instructions will be sent with each kit. The drawings will include structural details and electrical line diagrams for permitting. Please note, that you will most likely need to create your own plot plan for permitting. The Electrical 1 and 3-line diagrams will have spaces for the AC and DC disconnects in the system, however, we cannot provide these or spec them out, because of different codes in different locations. Please consult with your electrician to specify these parts for your grid-tied system.


To inquire on prices, please Click Here.

The picture below gives you an idea of the relative height and width of this system by looking at the installers underneath it and the trucks in front of it. This homeowner will be parking his cars under this unit.